email us
call us now

+86 755 26586158

Specialize in manufacturing injection mould&molded parts more than 20 years.

Industry News

Plastic mold production process and injection processing maintenance

Before mold design, the designer agrees that whether plastic products conform to the principle of injection molding should be discussed in detail with the product designer. This includes a discussion of product geometry, dimensional accuracy and appearance requirements, as well as the need to minimize unnecessary trouble in two-color injection molding.
read more

PC products for injection temperature requirements

45℃-135℃PC material heat resistance temperature range is -45℃-135℃. Beyond this temperature range, PC materials will appear aging deterioration, loss of inherent properties.
read more

Operation requirements for precision injection molding

The characteristics of precision injection molding are: the size of injection parts requires high precision and small tolerance. To achieve the requirements of precision injection molding must achieve the weight conditions are
read more

Process parameters affecting injection quality of plastic mold manufacturers

Considering the thickness of raw materials and articles, the temperature of the barrel should normally be set at a level 10-200 CD above the nominal melting temperature of the material. Amorphous materials such as PS and ABS have no specified melting point, so the barrel temperature should refer to the melt flow index (MI) and spiral process line (SPR).
read more

How can abs injection molding parts be produced by plastic mold injection processing factory to increase brightness?

In the production of plastic parts when the main reason is bad mold injection, industrial raw materials and other aspects, if the mold processing is bad, such as scars, wear, rough and other insufficient, it will be reflected in the plastic parts, plastic parts on poor luster.
read more

Temperature requirements for injection PC products

First of all, PC material characteristics of high definition, good fracture toughness, stress resistance, wide range of application temperature, PC process characteristics are: melting viscosity requirements of cutting rate is small, and the requirements of temperature, no significant solution point, melting body viscosity is high, high temperature PC material and hydrolysis reaction, injection PC products will be easy to crack.
read more

What are the reasons for insufficient and uneven hardness of plastic mold processing?

The hardness of die heat treatment is a very important mechanical property index, and the unqualified hardness is a very serious defect. After heat treatment, insufficient or uneven hardness will reduce the wear resistance and fatigue strength of the mold. Plastic mold processing manufacturers say that this will lead to early failure of the mold and seriously reduce the service life of the mold.
read more

What problems are generally solved in injection mold design

The injection mold structure should be reasonable. According to the drawings and technical requirements of the plastic parts, research and select the appropriate molding method and equipment, combined with the machining capacity of the factory, propose an injection mold structure plan, fully solicited opinions
read more

General steps of plastic mold design

1) Craft analysis of plastic parts (2) determine the selection and molding process of molding equipment (3) injection molding process analysis and structural design of injection molds (4) the size of the plastic mold design
read more

Brief introduction of gas - assisted injection system in plastic mould

Gas auxiliary injection molding system, this advanced system and technology, is to directly inject nitrogen into the plastic plastic in the mold cavity via the segmented pressure control system, causing the internal expansion surface of the plastic parts, but still maintain the shape of the product surface Intact.
read more

Company News

Company Mission

The dedication to fulfill our customer's needs and wants has always been needs and wants has always beenimperative to the way we operate and we adapt our services in order to achieve this.

Founded on Trust, Service, & Quality Work

we love what we do, and we believe in it. It’s not just plumbing to us, but a philosophy applied to every area of our lives.

Our Advantage

Enterprise strength

The staff of the mold and injection molding workshop shall simplify the number of the company's mold and injection molding enterprises to 100.

Technical advantages

High precision equipments
Rich project experience
Professional technical team
Rich experience in customer communication

Quality assurance

Correct machine selection
Selection and control of raw materials
Effective management of molds
Establish a sound quality assurance system
Quality inspection and management
Select appropriate control methods

Strictly implement the quality

In order to strengthen quality management and meet the needs of quality competition, enterprises nowadays have applied for the certification of enterprise product quality system for their own product quality assurance.

Good team

The core team is stable, serving hundreds of customers both demostic and abroad cusotmers successively, and winning the praise and respect from customers.

Service commitment

Ensure delivery on time as contracted
Elaborate processing
Provide customers with high quality products
Respond to customer timely
Provide reasonable Suggestions

Our company's mission is to keep doing it:

Serving customers, Making customers satisfied

Create value for customers, win-win cooperation

Our Culture

Corporate mission

Create value with customers
Grow with our employees

Corporate vision

Become an internationally competitive and sustainale company.

Quality policy

Keep improving, continuous improvement and excellence.

Service purposes

Carefully processed and dedicated to serve customers.